EV100 Handset Operation
PS S5.5 5710
F-code Section C-code
Version no T-code
000
© BT Products AB
235
Service Manual 1997-09-15
6.7. Function 11
Speed Limit 1 (SL1) (Push 11)
This function allows for the adjustment of the speed limit
(maximum battery volts to motor) when the SL1 limit switch is
normally closed switch connected to battery negative, the
switch opening enables speed limit.
Range 96% to 0% battery volts
Set 0 to 180
Setting of 0 set units will disable speed limit function and
allow top speed with no limit switch connected.
6.8. Function 12
Speed Limit 2 (SL2) (Push 12)
Same as function 11 except using SL2 limit switch for input.
6.9. Function 13
Speed Limit 3 (SL3) (Push 13)
Same as function 11 except using SL3 limit switch for input.
To Next Page
Loading...
