T104 Series Indicators EN-21
3.5.7 Application Settings
The application can be customized for user preferences. Please refer to Application Settings section in
Weighing Mode for details about how to enter application settings.
The Totalization Configurations are defined below (defaults in Bold).
Item Available Settings Comments
Totalization
Off, Auto, Manual
To select Totalization method or
disable it
Note: you cannot disable Totalization if you are in the mode currently.
The Table Configurations are defined below (defaults in Bold).
Item Available Settings Comments
Table
On, Off
To enable or disable Table for
printing current weight during
Totalization
3.6
Skip
There are two options:
Off ( ): The skip function is disabled (Default)
On ( ): The skip function is enabled, it affects the following application modes: The Counting function
skips , the Check function skips the
, the
Totalization function skips the
.
To set the skip option:
1. Long press the Menu button until you see .
2. Release the button and wait for the display to show .
3. Short press the No button several times to navigate until you see , press the Yes button to enter
the sub menu.
4. Short press the No button several times to navigate until you see
a) If you want to turn on the skip function, select , then short press the Yes button to confirm.
b) If you want to turn off the skip function, short press the No button several times until you see , then
short press the Yes button to confirm.
5. Press the Exit button to exit.
To Next Page
Loading...
Need help?
General
