T104 Series Indicators EN-35
6. MAINTENANCE
CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE CLEANING.
6.1 Cleaning
For T104P, the housing may be cleaned with a cloth dampened with a mild detergent if necessary.
For T104S, use approved cleaning solutions for the stainless-steel Indicator housing and rinse with water. Dry
thoroughly.
WARNING: Electric Shock Hazard. Disconnect the equipment from the power
supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning
agents.
To Next Page
Loading...