BTEK T104 Series User Manual

EN-28 T104 Series Indicators
Stability
[ ]
Set the amount reading can vary before the stability symbol turns off.
= 0.5 of a scale division
= 1 scale division
= 2 scale divisions
= 5 scale divisions
Zero
[ ]
Set the percentage of scale capacity that can be zeroed.
2% = zero range is within +/-2%
100% = zero range is within +/-100%
Filter
[ ]
Set the amount of signal filtering.
= faster stabilization time with less stability.
= normal stabilization time with normal stability.
= slower stabilization time with more stability.
AZT
[ ]
Set the automatic zero tracking feature.
= disabled
= the display will maintain zero until a change of 0.5 of a divisions per second has been
exceeded.
= the display will maintain zero until a change of 1 division per second has been exceeded.
= the display will maintain zero until a change of 3 divisions per second has been exceeded.
Backlight
[ ]
Set the display backlight feature.
= backlight is disabled.
= backlight is enabled and always on.
= backlight is disabled after 20 seconds of no activity.
Backlight Color
[
Set the display backlight color.
= backlight color is amber.
= backlight color is green.
= backlight color is red.
= backlight color is yellow.
Screen Saver
[ ]
Set whether the screen saver is enabled after the selected time period.
= screen saver is disabled
= the screen saver is enabled after 1 minute of no activity.
= the screen saver is enabled after 2 minutes of no activity.
= the screen saver is enabled after 5 minutes of no activity.
Auto Off
[ ]
Set whether the display enters sleep mode after the selected time period.
= disabled
= the display enters sleep mode after 1 minute of no activity.
= the display enters sleep mode after 5 minutes of no activity.
= the display enters sleep mode after 10 minutes of no activity.
PWM.SAVE
[ ]
Set whether to enable power saving mode after the scale enters standby mode. If it is enabled, it will take
about 3 seconds before the indicator returns to weighing when weight is changed on the pan or you press
the indicator's buttons.

BTEK T104 Series Specifications

General

Brand	BTEK
Model	T104 Series
Category	Measuring Instruments
Language	English