Buchi FatExtractor E-500 - Preparing the instrument for Economic Continuous Extraction; Installations for Economic Continuous Extraction; Preparing the extraction glass chamber for an Economic Continuous Extraction

5 | Installation BÜCHI Labortechnik AG
34/88 Operation Manual FatExtractor E-500
5.11 Preparing the instrument for Economic Continuous Extraction
5.11.1 Installations for Economic Continuous Extraction
u Prepare the condenser. See Chapter5.13 "Preparing the condenser",
page36
u Prepare the Economic Continuous Extraction chamber. See Chap-
ter5.11.3 "Installing the extraction glass chamber Economic Continuous
Extraction", page34
u Install the protection shields. See Chapter5.12.2 "Installing one protec-
tion shield (Hot and Economic Continuous Extraction only)", page36
u Select the Economic Continuous Extraction method on the interface.
See Chapter5.14 "Selecting a configuration", page39
5.11.2 Preparing the extraction glass chamber for an Economic Continuous Extraction
u Attach the sealing to the extraction
glass chamber.
5.11.3 Installing the extraction glass chamber Economic Continuous Extraction
u Prepare the extraction glass chamber. See
Chapter5.11.2 "Preparing the extraction glass
chamber for an Economic Continuous Extrac-
tion", page34
u Pull the chamber rack.
u Put the extraction glass chamber in the instru-
ment.