Buchi FatExtractor E-500 - Mobile Connection; Requirements for Local Network Settings; Preparing the Instrument for App Using

5 | Installation BÜCHI Labortechnik AG
40/88 Operation Manual FatExtractor E-500
u Pull the condenser out of the condenser rack.
u Disconnect the solvent collector tube.
u Disconnect the solvent collector tube from the
installation board.
5.16 Mobile connection
5.16.1 Requirements for local network settings
u The following port has to be enabled in the firewall settings on the internet gate-
way:
 TCP (HTTPS) traffics through remote port 443
u In order to use the BUCHI Cloud a DNS server must be configured on the instru-
ment.
NOTE
If there is no DNS server available enter the IP address for the BUCHI Cloud connec-
tion manually.
NOTE
If there is no DHCP server available enter the IP address, gateway subnet mask and
DNS server manually.
5.16.2 Preparing the instrument for app using
NOTICE!Do not unplug the LAN cable
while the device is connected to the
BUCHI Cloud Services
u Connect the instrument with the LAN
network.