Buchi FatExtractor E-500 - 10 Editing a Solvent; Creating a New Solvent; Changing the Name of a Solvent (Own Created Solvents Only)

10 | Editing a solvent BÜCHI Labortechnik AG
72/88 Operation Manual FatExtractor E-500
10 Editing a solvent
The solvent menu contains the predefined solvents for the extraction procedures.
Additional solvents can be added by following the instructions in Chapter2 "Safety",
page9.
10.1 Creating a new solvent
Navigation path
➔
u Navigate to the [Solvent] menu via the navigation path.
u Tap the submenu [Create own].
ð The new solvent is created.
10.2 Changing the name of a solvent (own created solvents only)
Navigation path
➔
u Navigate to the [Solvent] menu via the navigation path.
u Tap the name of the solvent you wish to edit.
ð The display highlights the selection in green.
u Tap the function [OK] on the function bar.
ð The display shows the view Solvent.
u Tap the action [Name].
ð The display shows a dialog with an alphanumeric input box.
u Enter a name for the solvent.
u Tap the function [Save] on the function bar.
ð The new name is saved.
ð The dialog box closes.