Buchi FatExtractor E-500 - Accessories; Holder for Extraction Thimbles

BÜCHI Labortechnik AG Appendix | 14
Operation Manual FatExtractor E-500 85/88
Order no.
Conversion kit ECE to Soxhlet LSV
Includes 6 Extraction glass chamber Soxhlet LSV (11062497), 6 Soxhlet as-
semblies cpl. (11067065) and a set of draining tubes for Soxhlet (11067478),
two safety shields top, cpl. (2 x 11067832)
11068493
Upgrade kit Analyte protection
For later upgrade of a FatExtractor E-500 with analyte protection sensor
11068524
Upgrade kit Interface Pro
For later upgrade of a FatExtractor E-500 with a Pro interface (7 " touch
screen)
11068525
14.2.3 Accessories
Order no. Image
Holder for glass sample tubes, stainless steel 11067219
Holder for glass sample tubes, PTFE 11067220
Holder for extraction thimbles (diameter 25 - 43
mm)
11068443
Extraction beaker carrier
Allows to carry 6 beakers (11067474)
11067042
Extraction beaker HE carrier
Allows to carry 6 beakers HE (11067475)
11067493
Set condenser insulations E-500, 6 pcs.
The insulation of the condensers prevent condensing
water and is recommended in high humidity environ-
ment
11069078
Set insulation cooling water hoses
The insulation of the water hoses prevent condensing
water and is recommended in high humidity environ-
ment.
11069079
Support solvent supply
Allows to fix the tubes of solvent dispensers to the con-
densers for convenient solvent addition.
11068306
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation.
Meant to be used with a vacuum controller/interface.
031356
Extension cable for the cooling water valve, 2 m 11069477