Buchi FatExtractor E-500 - Page 46

6 | Operating the interface BÜCHI Labortechnik AG
46/88 Operation Manual FatExtractor E-500
Action Option Explanation
[Actors] Change settings The following settings can be
changed:
 Valves:
Soxhlet valves See Chapter11.4
"Draining solvent from Extraction
glass chamber (Soxhlet only)",
page76
Tank valves See Chapter11.3
"Draining solvent from the instru-
ment", page75
Cooling water valve On/Off
 Heater On/Off
 Pump On/Off
 Lift current
u Tap up or down.
ð Display shows the actual
current consumption.
 Beeper On/Off
 Chiller On/Off (option)
Submenu System information
The submenu [System information] contains details of the connected devices and in-
formation on network connection diagnosis.
Action Option Explanation
[Extraction unit] View The following information on the Ex-
traction Unit is available:
 Serial number
 Firmware version
 Operating hours
 Board temperature
 Code
[Interface] View The following information on the in-
terface is available:
 Serial number
 Firmware version
 Operating hours
 Board temperature
 Code
 30 V Operating voltage
 5 V Operating voltage
Submenu History QR code
Shows the history list of the data export QR codes to export data. SeeChapter9.6
"Exporting extraction parameters", page70