7 | Operating the interface pro BÜCHI Labortechnik AG
52/88 Operation Manual FatExtractor E-500
Submenu Service
WARNING
Incorrect use of the actor settings.
Incorrect use of the actors settings can cause instrument damages and injuries.
u Carry out the actor setting as described.
Action Option Explanation
[Sensors] View All sensor signals can be observed:
Flow senors
Level sensors
Analyte protection (option)
Protection shield
Valves
Lift current
Line voltage
Line frequency
[Actors] Change settings The following settings can be
changed:
Valves:
Soxhlet valves See Chapter11.4
"Draining solvent from Extraction
glass chamber (Soxhlet only)",
page76
Tank valves See Chapter11.3
"Draining solvent from the instru-
ment", page75
Cooling water valve On/Off
Heater On/Off
Pump On/Off
Lift current
u Tap up or down.
ð Display shows the actual
current consumption.
Beeper On/Off
Chiller On/Off (option)
Submenu System Information
The submenu [System information] contains details of the connected devices and in-
formation on network connection diagnosis.
To Next Page
Loading...
