View Voltage/current
Relevant voltage and current in the battery.
Press to view:
Charging
Shows
remaining capacity (%) (based on the battery's
capacity when it was new) and hours remaining until
battery is empty. During operations, the number of
hours are shown until the battery is empty, and when
the battery is charged, the number of hours are shown
until a fully-charged battery.
Pressing
again shows:
The battery's health status
The value shown is based on full capacity when the
battery was new. The battery can have the following
status:
- Excellent – no action required.
- Good –
good status but the battery will not achieve
its full capacity.
- Poor – replace the battery.
The batteries' status (On/Off) for the driveline is shown
with a symbol at the bottom of the Battery Management
display
= Off.
Optional
47708085 11-2016 © Bukh 51
To Next Page
Loading...
