What to do if Burdick ELI 280 Medical Equipment is unable to print, paper queue mark not detected?
If your Burdick Medical Equipment is unable to print because the paper queue mark was not detected as expected, add paper. Then, manually advance the page evenly past the closure point of the writer, close the writer cover, and press STOP.
How to turn on Burdick Medical Equipment when it is in Standby Mode?
If your Burdick Medical Equipment is in Standby Mode, press the On/Standby button to return to active use.
How to fix Burdick Medical Equipment when unable to acquire ECG or print?
If you are unable to acquire an ECG or print with your Burdick Medical Equipment, charge the battery using AC power.
How to resolve poor LA electrode or left arm tremor on Burdick ELI 280?
If your Burdick Medical Equipment indicates a poor LA electrode or left arm tremor, check the patient prep and re-prep if necessary with a new electrode.
What to do for poor LL electrode or left leg tremor on Burdick ELI 280 Medical Equipment?
If your Burdick Medical Equipment is showing a poor LL electrode or left leg tremor, check the patient prep and re-prep if necessary using a new electrode.
What causes poor RA electrode or right arm tremor in Burdick ELI 280?
If you are getting a reading of poor RA electrode or right arm tremor on your Burdick Medical Equipment, check the patient prep and re-prep if necessary with a new electrode.
How to eliminate high frequency noise in Burdick ELI 280 Medical Equipment?
If you are experiencing high frequency noise with your Burdick Medical Equipment, adjust the low pass filter setting; check proximity to power cables; and check the AC filter setting (50 Hz or 60 Hz).
Why is Burdick Medical Equipment unable to transmit or receive ECGs?
If you are unable to transmit or receive ECGs on your Burdick Medical Equipment, check for the correct baud rate, phone number, and cable connections or site number.
What to do if Burdick ELI 280 Medical Equipment says 'No available memory. ECG data too noisy to store'?
If your Burdick Medical Equipment displays 'No available memory' because the ECG data is too noisy to store, press stop to continue. Transmit or mark records for deletion in the directory. Correct the noise issue and attempt acquisition/storage again.
What to do if Burdick ELI 280 shows a lead fail error?
If the Burdick Medical Equipment indicates a 'Lead fail,' correct the faulty lead.
Details on Mortara Instrument's responsibility for product safety and performance.
Information regarding document updates, warranties, and disclaimers.
Contact information for Mortara Instrument's main headquarters.
Contact details for technical assistance and support services.
Details on the warranty coverage for Mortara products and limitations.
Critical safety warnings regarding device operation and potential hazards.
Precautions to prevent device damage or reduced usability.
Information about wireless data transmission and RF safety guidelines.
Explanation of various symbols and markings used on the equipment.
General precautions for handling and cleaning the device.
Procedures for cleaning and disinfecting the device and its accessories.
Manufacturer's declaration regarding electromagnetic emissions compliance.
Guidelines for safe distances from RF equipment to prevent interference.
Overview of the manual's objective and the information it provides.
Description of the ELI 280 electrocardiograph and its capabilities.
Explanation of the ELI 280's display screen and its parameters.
Steps for initial setup and configuration of the ELI 280.
Instructions for correctly loading thermal paper into the printer.
Details on operating the device using AC power and battery.
Steps to prepare the patient before acquiring an ECG.
Guidance on proper electrode placement for accurate ECG readings.
Procedures for entering patient demographic information.
Options and procedures for transmitting ECG data.
Instructions for connecting the device to a wired network.
Steps for configuring and connecting to a wireless network.
Overview of the ECG directory for storing and managing records.
Information on managing ECG orders and the worklist.
Methods for searching ECG records by patient name or ID.
Overview of system settings and access to configuration menus.
Guidance on setting and managing device administrator and technician passwords.
Settings related to ECG acquisition, display, and filtering parameters.
Lists common LCD messages, their problems, and corrective actions.
Troubleshooting guide for ECG signal artifacts and lead misplacements.
Recommendations for maintaining battery life and proper charging practices.
General| Brand | Burdick |
|---|---|
| Model | ELI 280 |
| Category | Medical Equipment |
| Language | English |
To Next Page