Cadel nice - Fume Pipes Annual Cleaning; General Cleaning; Cleaning of Painted Metal Panels; Cleaning of Ceramic and Stone Panels

77
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY
EN
Fig. 40 - Fume passages cleaning Fig. 41 - Silicon laying
• Clean the fume passages with the aid of a brush (see Fig. 40 page 77).
• Lay the silicon round the hole (see Fig. 41 page 77) and screw again the lids.
• Reassemble all.
12.8 FUME PIPES ANNUAL CLEANING
Clean once a week from soot with brushes.
The cleaning operation must be executed by a specialized stove-repairer who will provide for the cleaning
of fume pipe, chimney ue and chimney pot. He will also check their eciency and will release a written
declaration of the safety of the appliance. This operation must be executed at least once a year.
12.9 GENERAL CLEANING
For cleaning external and inner parts of the stove do not use steel wools, muriatic acid or other corrosive
and abrasive materials.
12.10 CLEANING OF PAINTED METAL PANELS
To clean painted metal panels use a soft cloth. Do not use degreasant agents like alcool, diluents, acetone,
gasoline because these could irremediably damage the varnish.
12.11 CLEANING OF CERAMIC AND STONE PANELS
Some stove models has an external lining made up of ceramic or stone. These pieces are handmade
therefore they could inevitably present crazings, seedinesses, shadings.
To clean ceramic or stone panels use a soft and dry cloth. If using any cleaners this will seep through the
crazings putting them in evidence.
12.12 GASKET REPLACEMENT
In case of deterioration of re door, hopper or fume chamber gaskets, it is necessary to replace them by
an autorized technician in order to guarantee the good running of the stove.