The Rainsense wipers operate in a delay mode as well as
a continuous low or high speed depending on the
amount of moisture and the sensitivity level. The MIST
and “wash” cycles operate as normal and
are
not
affected by the Rainsense function.
NOTICE:
The wipers must be turned
off
when going
through a car wash to avoid damage.
It is important to note that the Rainsense wiping feature
(AUTO
DELAY)
can be overridden at any time by
manually changing the wiper control to
LO
or
HI
speed.
Note that if you ever need
to
replace the windshield,
make sure it is Rainsense compatible.
Windshield Washer
In freezing weather, don’t use your washer until
the windshield is warmed. Otherwise the washer
fluid can
form
ice on the windshield, blocking
your vision.
At the top of the turn signaVmultifunction lever, there
is
a paddle with the word PUSH on it.
To
spray washer
fluid
on
the windshield, press and release
this
paddle.
The wipers will clear the windshield and either
stop
or
return
to
your preset speed. For more washer cycles,
press and hold the paddle.
LOW
WASHER
FLUID will be displayed on the Driver
Information Center
(DIC)
when the washer fluid reaches
a low level.
2-38