Fuel
Data
Panel
Press the AVG button to display the average
mile-per-gallon (AVG MPG).
You
can also display it in
metric units by pressing the ENG MET button.
-1
When AVG MPG is selected, the total distance is
divided by the total fuel used.
When the INST button (Instantaneous Fuel Economy) is
selected, you will see what the fuel economy is at that
instant. The computer takes a new reading twice every
second. It will show economy up to
70
miles-per-gallon
(or
2 L
per
100
km).
To reset the average fuel economy, press the
INFORMATION button until the AVG MPG is
displayed on the Driver Information Center (DIC). Press
and hold the
RESET
button until both the fuel data
center and DIC display reads
0.0.
Digital
Cluster
For vehicles equipped with an analog cluster (not
shown), fuel data can be obtained by pressing the
INFO
button. See “Analog Control Buttons’’ later
in
this section.
The fuel data panel tells you all you need to know about
the fuel economy and how far you can travel with the
he1 remaining.
The
RANGE
display shows how far the computer thinks
you can travel with the fuel that is in the tank. The
computer does not know what driving conditions will be
like for the rest of your trip,
so
the range
is
estimated
based on the recent fuel economy. Therefore,
the
range
reading may change as your driving habits change.
Going from city to highway driving may increase the
range reading.
If the range display shows
LO,
you should
stop
for fuel
as
soon
as
possible.
2-78.
To Next Page
Loading...
Need help?
General
