If your child restraint has a top strap, your dealer can
obtain a kit with anchor hardware and installation
instructions specifically designed for this vehicle. The
dealer can then install the anchor for you.
In
Canada,
this
work will be done for you free of charge. Or, you
may install the anchor yourself using the instructions
provided in.the
kit.
Securing a Child Restraint in
a
Rear
Outside Seat Position
U
You’ll be using the lap-shoulder belt. See the earlier part
about the top strap
if
the
child restraint has one. Be sure
to follow the instructions that came with the child
restraint. Secure the child in the child restraint when
and
as
the instructions say.
1.
Put
the
restraint on the seat.
2.
Pick up the latch plate, and
run
the lap and shoulder
portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will
show
you how.
Tilt the latch plate to adjust the belt if needed.
If
the shoulder belt goes in front of the child’s face or
neck, put
it
behind the child restraint.
1-43
To Next Page
Loading...
Need help?
General
