Automatic seat and mirror movement is programmed
through the Driver Information Center (DIC)
so
that the
driver can select whether or not movement will occur
using the
RKE
transmitter or by placing the ignition key
in the ignition. For programming information, see
“Programmable, Memory and Personalization
Features” in the Index.
Heated Front Seat (Option)
The control is located
on
the outboard side
of
each front
seat. Move the
SEAT
HEAT control to either
LO
or
HI
to turn on the heating elements in the seat. The
LO
setting
warms
the seatback and cushion until the seat
approximates body temperature. The
HI
setting heats the
seat to a slightly higher temperature.
A
telltale light in
the control reminds you that the heating system is in use.
The heated seats can only be used when the ignition is
turned on.
Reclining Front Seatbacks
Press
the
recliner control forward or rearward to adjust
the seatback.
1-4
To Next Page
Loading...
Need help?
General
