FEATURE
OFF
appears as well as the next
prompt
--
DOORS UNLOCK IN PARK. If this
prompt is chosen, FEATURE ON appears. If a no
response was made, DOORS UNLOCK
KEY
OFF will
appear. At this point, a yes or no response automatically
brings up the LGHTS
FLSH
AT UNLOCK feature.
LocWnlock
Confirmation
This personalization feature allows the driver to
program the parking lamps to blink when the lock or
unlock buttons on the remote keyless entry transmitter
are pressed, to program the horn to sound when the lock
button is pressed. and/or to program the exterior lamps to
turn on when the unlock button is pressed. Press the
TRIP (TRIP RESET) button to answer “yes,” press the
RESET (INFO RESET) button to indicate “no” or press
the INFORMATION (INFO) button to “skip” to the next
personalization feature.
To begin programming, your vehicle’s ignition must be
in RUN. Press and hold the INFORMATION (INFO)
and RESET (INFO RESET) buttons at the same time to
display the following prompts. LOCKNNLOCK
confirmation is the second feature to appear. To “skip”
past the first personalization feature, press the
INFORMATION
(INFO)
button.
LGHTS FLSH AT UNLOCK:
Parking lamps blink
twice when the unlock button on the remote keyless
entry transmitter is pressed.
LIGHTS FLASH AT
LOCK:
Parking lamps blink
once when
the
lock button on the remote keyless entry
transmitter
is
pressed.
HORN SOUNDS AT LOCK:
Horn
sounds
when
the lock button on the remote keyless entry transmitter
is pressed.
EXT
LIGHTS AT UNLOCK:
Exterior lamps (parking
lamps, taillamps, sidemarker lamps, license plate lamps,
low-beafn headlamps, etc.)
turn
on when the unlock
button on the remote keyless entry transmitter is
pressed, and
it
is
dark outside. These lamps stay on for
about
20
seconds or when the key is turned out of
OFF.
The prompts listed here appear in the same order as
displayed on the Driver Information Center (DIC).
FEATURE ON appears when a yes response is made
and FEATURE
OFF
appears with a no response.
To
skip
to the next personalization feature (REMOTE RECALL
MEMORY), press the INFORMATION (INFO) button.
2-92