.
3.
Air
Conditioning
.On
hot days, open the windows long enough to let hot
inside
air
escape.
This
reduces the
time
it takes for your
vehicle to cool down. Then keep your windows closed
for the
air
conditioner to work its best.
I
,
With the digital cluster climate control panel, press the
AUTOLECON
button to assist
'in
cooling
air
and
in
maintaining proper airflow. Adjust the temperature to a
comfortable setting by pressing the blue,button to cool
your
vehicle and pressing the red button to warm your
vehicle. Press the fan button
arrows
up or down to
,adjust the fan speed.
If
your vehicle has a climate control panel (which is
standard with the analog cluster), press the AC button
or
the
TEMPLAUTO
knob to turn the system on. The
system'will cool and dehumidify the
air
inside the
vehicle. Also while in the AUTO mode, the system will
use recirculation as necessary
to
cool the
air.
You
may
also need to adjust- the interior temperature and the fan
speed as needed.
When'the
air
conditioner is on, you may sometimes
notice slight changes
in
your vehicle's engine
speed
and power.
This
is normal because the system is
designed to cycle the compressor
on
and
off
to keep
the desiied temperature.
Heating
With the digital cluster climate control panel, press the
AUTOECON button to direct airflow and to help save
fuel.
Adjust the temperature, if necessary, by pressing
the blue button to decrease temperature and pressing the
red button to increase temperature.
Also
remember to
adjust the fan speed by pressing the up or downarrow.
If
your vehicle has a climate control panel (which is
standard with the analog cluster), press the
MODE
button to select heater. Adjust the interior temperature to
a comfortable level and if the fan speed needs adjusting,
press the up
or
down arrow.
With each system, outside
air
will be brought
in
and sent
through
the
floor,
air
conditioning or bi-level outlets
(depending on the condition). The heater works best
if
you keep your windows closed whiIe using it.
3-10
1
_---
-