CD
Adapter Kits
It is possible
to
use a
CD
adapter
kit
with your cassette
tape player after activating the bypass feature on your
tape player.
To
activate the bypass feature, use the following steps:
Turn the ignition to RUN or ACCESSORY.
Turn the radio
off.
Press and hold the SOURCE button for two seconds.
The tape symbol on the display will flash three
times, indicating the feature is active.
Insert the adapter.
This override routine will remain active until EJECT
is
pressed.
Radio Personalization
(If
Equipped)
If your vehicle is equipped with the
AM-FM
Stereo
with Cassette Tape Player and
1
(H
or A) or
2
(H or A)
appears in the display when the radio is first turned on,
your vehicle is equipped with this feature. If your
vehicle is equipped with any other audio system and
DRIVER
1
(HOME
or AWAY) PRESETS or DRIVER
2
(HOME
or
AWAY)
PRESETS
appears in the display
when the radio is first turned
on,
your vehicle is
equipped with this feature.
A A/
With this feature, your vehicle will recall the latest
radio settings as adjusted the last time your vehicle was
operated. This feature allows two different drivers to
store and recall their own radio settings. The settings
recalled by the radio are determined by which RKE
transmitter
(“1”
or
“2”)
was used to enter the vehicle.
The number on the back of the RKE transmitter
corresponds to driver
1
or to driver
2.
The radio settings
will automatically adjust to where they were last set by
the identified driver. The settings can also be recalled by
briefly pressing the memory seat buttons
1
or
2
located
on the driver’s door.
Your
radio can store home and away presets. Home and
away presets allow you to use one set of preset radio
settings in the area where
you
live, and another
set
when
you go out of town. That way, you will not need to
reprogram your presets every time you travel. With the
radio
off
and the clock displayed, use
FF
and RW to
select home or away presets.
To
select the away presets,
press and hold
FF
for five counts until you hear a beep.
The next time the radio comes on, the away presets will
be active. To select the home presets, press and hold RW
for five counts until you hear a beep. The next time the
radio comes on, the home presets will be active.
3-30
To Next Page
Loading...
Need help?
General
