RDM:
Press this button to hear the tracks in random,
rather than sequential, order. RANDOM will appear
on the display. Press TUNE-SEEK while RDM is on
the display to randomly seek through discs and tracks.
Press RDM again to turn
off
random play. (This button
is not available on the
AM-FM
Stereo with Cassette
Tape Player.)
SIDE:
Press this button to select the next disc in the
changer. If your vehicle
is
equipped with the AM-FM
Stereo with Cassette Tape Player, CD and the disc
number will appear on the display each time you press
this button.
If
your vehicle is equipped with any other
audio system, DISC LOADING will appear on the
display and the disc number on the radio display will
go to that of the next available CD each time you press
this button.
SOURCE:
Press this button to select a source. The
audio source must be loaded to play.
If
none of the audio
sources
are
loaded,
NO
SOURCE LOADED will appear
on the display. Press this button again or BAND to
switch back to the radio. (CD will be displayed
for
a
few seconds instead on the AM-FM Stereo with Cassette
Tape Player, then the radio will play.)
EJECT
Slide the CD changer door all the way open
and the disc holder will automatically eject.
Compact
Disc
Changer Errors
CD CHANGER ERROR could be displayed for the
following:
The road is too rough. The disc should play when
the road is smoother.
The disc is dirty, scratched, wet or loaded label
0
The air is very humid.
If
so,
wait about an hour and
CD CHANGER DOOR OPEN is displayed when the
CD changer door
is
left open. (CHEK DOOR will be
displayed instead on the AM-FM Stereo with Cassette
Tape Player.) Completely close the changer door to
restore normal operation.
If
any error occurs repeatedly or if an error cannot be
corrected, please contact your dealer.
side up.
try
again.
3-35