is already on. Press the
RDS
SELECT button. Then
press and hold the
RDS
button for two seconds.
REGION:
ON
will appear on the display.
While
REGION: ON appears, on the display, press the
RDS
button again to turn
the
region function
off.
REGION:
OFF
will appear on the display. The region function can
be turned on again by pressing the
RDS
button.
TA
(2):
Press the
RDS
SELECT button, ,followed by
this button to receive traffic announcements. The radio
will-turn on the TA'display.
TP
will appear on the
display if the tuned station broadcasts traffic
announcements. You may
also
receive traffic
announcements from stations in the network related to
the tuned station.
If
the current tuned station does not
broadcast traffic announcements, the radio will seek to a
station which does. When the radio finds -a station which
broadcasts traffic announcements, it will stop.
If
no
station is found, NONE
FOUND
will appear on the
display. When SEEK or SCAN
is
pressed with the
traffic announcement function on, the radio will only
stop at stations which broadcast traffic announcements.
While
a tr&c announcement plays, the radio uses a
special
type
of volume called TA volume.
To
increase TA
volume,
turn
the PWRNOL knob to the right.
Turn
it
to
the
left
to decrease volume. TA
VOLUME
'will appew, on
the display while the volume
is
being adjusted.
When a traffic announcement comes on the tuned radio
station or a related network station, you will hear it,
even
if
the volume is muted or a cassette tape or
compact disc
is
playing.
If
the radio tunes to a related
network station for a traffic announcement, it will return
,
to the original station when the announcement
is
finished. If
the
cassette tape or compact disc player was
being used, the tape or compact disc will stay in the
player and resume play at the point where
it
stopped.
Press the
RDS
SELECT button, followed by this button
again
to
turn TA off.
MSG.
(3):
When
RDS
is
on,
if
the current station has a
message,
MSG
will appear on the' display. Press the
RDS
SELECT button, followed by
this
button to see the
message.
If
the whole message does not appear on the
display, parts of the message will appear every three
seconds until the message is' completed.
To
see the parts
of the message faster than every three seconds, press
this
button again. A new group
of
words will appear on the
display. Once the complete message-has been displayed,
MSG
will disappear from the display until another new
MSG
is received. Each message can only be read once.
PTY
(4):
This
button is used to
turn
on and
off
Program'
Tjq~
(PTY)
seeks adscans.
,hss
the
RDS
SELECT
button, followed ,by
this
button. The
PTY
display will
turn
on.
RDS
SELECT:
PTY
NEWS
will
appear on the display
3-25
To Next Page
Loading...
Need help?
General
