3.
Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
4.
Push the latch plate into the buckle until it clicks.
Be sure to use the correct buckle when buckling your
lap-shoulder belt. If you find that the latch plate will
not go fully into the buckle, see
if
you
are using
the
buckle for the center passenger position.
Pull up on the latch plate to make sure it is secure.
If
the belt isn’t long enough, see “Safety Belt
Extender” at the end of this section.
Make sure the release button on the buckle is
positioned
so
you would be able to unbuckle the
safety belt quickly if you ever had to.
1-12
To Next Page
Loading...
Need help?
General
