When you sit in a center seating position,
you
have a lap
safety belt, which has no retractor.
To
make the belt
longer, tilt the latch plate and pull
it
along the belt.
To
make the belt shorter, pull its free end as shown until
the belt is snug.
Buckle, position and release it the
same
way as the lap
part of a lap-shoulder belt.
If
the belt isn’t long enough,
see “Safety Belt Extender” at the end
of
this section.
Make sure the release button on the buckle
is
positioned
so
you would be able to unbuckle the safety belt quickly
if you ever had to.
1-30
1
I
To Next Page
Loading...
