3 Customizing AF FunctionsN
124
You can change the number of manually selectable AF points. If 61-
point automatic selection AF is set, the Area AF frame (entire AF area)
will be used for AF regardless of the setting below.
: 61 points
All AF points will be manually
selectable.
: Only cross-type AF points
Only cross-type AF points will be
manually selectable. The number of
selectable cross-type AF points will
differ depending on the lens.
: 15 points
Fifteen major AF points will be
manually selectable.
: 9 points
Nine major AF points will be manually
selectable.
Selectable AF point
With a lens from Groups F to H (p.103-104), the number of manually
selectable AF points will be fewer.
Even with settings other than [61 points], AF point expansion (manual
selection ), AF point expansion (manual selection, surrounding points)
and Zone AF (manual selection of zone) are still possible.
When you press the <S> button, the AF points which are not manually
selectable will not be displayed in the viewfinder.
To Next Page
