409
3 Custom Function SettingsN
C.Fn3: Others
Warnings z in viewfinder
When any of the following functions are set, the <z> icon can be
displayed in the viewfinder (p.31).
Select the function for which you want the warning icon to appear, and
press <0> to append a <X>. Then select [OK] to register the setting.
When monochrome V is set
If the Picture Style is set to [Monochrome] (p.166), the warning
icon will appear.
When WB is corrected
If white balance correction is set (p.179), the warning icon will
appear.
When one-touch image quality is set
If you change the image-recording quality with the one-touch
image quality function (p.424), the warning icon will appear.
When M is set
If [z3: High ISO speed NR] is set to [Multi Shot Noise
Reduction] (p.183), the warning icon will appear.
When spot metering is set
If the metering mode is set to [Spot metering] (p.213), the
warning icon will appear.
If you set any of the checkmarked [X] functions, <z> will also appear for
the respective setting displayed on the Quick Control screen (p.60) and
Custom Quick Control screen (p.427).
To Next Page
Loading...
