321
x Image Playback
3
Exit the image playback.
Press the <x> button to exit the
image playback and return to
shooting-ready state.
With the shooting information screen displayed (p.320), you can tilt
<9> up or down to change the shooting information displayed at the
screen’s bottom as follows. For details, see pages 323-324.
In single-image display and two-image
display (p.332), you can overlay the grid
on the image playback.
With [33: Playback grid], you can
select [3x3 l], [6x4 m], or [3x3+diag
n].
This function is convenient for checking
the image’s vertical or horizontal tilt as
well as composition.
Shooting Information Display
3 Grid Display
Detailed information
Lens aberration correction information
Color space / Noise reduction information
Picture Style information 2
Lens / Histogram information
White balance information
Picture Style information 1
The grid is not displayed during movie playback.
To Next Page
Loading...
