3 Setting the Date, Time, and Zone
50
4
Set the date and time.
Turn the <
5
> dial to select the number.
Press <0> so <r> is displayed.
Turn the <5> dial to select the
desired setting, then press <0>
(Returns to <s>).
5
Set the daylight saving time.
Set it if necessary.
Turn the <5> dial to select [Y].
Press <0> so <r> is displayed.
Turn the <5> dial to select [Z],
then press <0>.
When the daylight saving time is set
to [Z], the time set in step 4 will
advance by 1 hr. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hr.
6
Exit the setting.
Turn the <5> dial to select [OK],
then press <0>.
X The date/time/zone and daylight
saving time will be set and the menu
will reappear.
The date/time/zone settings may be reset when the camera is stored
without the battery, when its battery becomes exhausted, or when it is
exposed to below freezing temperatures for a prolonged period. If this
happens, set the date/time/zone again.
After changing the time zone, check that the correct date/time are set.
When performing [Sync time between cameras] via Wireless File
Transmitter, using another EOS 5DS/EOS 5DS R is recommended. If
you perform [Sync time between cameras] using different models, the
time zone or time may not be set correctly.
To Next Page
