67
If the card is new or was previously formatted by another camera or
computer, format the card with this camera.
1
Select [Format card].
Under the [51] tab, select [Format
card], then press <0>.
2
Select the card.
[f] is the CF card, and [g] is the SD
card.
Select the card, then press <0>.
3
Select [OK].
X The card will be formatted.
When [g] is selected, low-level
formatting is possible (p.68).
For low-level formatting, press the
<L> button to append [Low level
format] with a checkmark <X>, then
select [OK].
Before You Start
3 Formatting the Card
Cautions for Formatting the Card
When the card is formatted, all images and data on the card will be
erased. Even protected images will be erased, so make sure there is
nothing you need to keep. If necessary, transfer the images and data
to a computer, etc., before formatting the card.
To Next Page
