3 Custom Function SettingsN
412
Default Erase option
During image playback and image review after image capture, when
you press the <L> button, the erase menu appears (p.358). You can
set which option, [Cancel] or [Erase], is to be preselected on this
screen.
If [Erase] is set, you can just press <0> to quickly erase the image.
: [Cancel] selected
L : [Erase] selected
Retract lens on power off
This is to set the lens retraction mechanism for when a gear-driven
STM lens (such as EF40mm f/2.8 STM) is attached to the camera.
You can set it to retract the extended lens automatically when the
camera’s power switch is set to <2>.
ON: Enable
OFF: Disable
If [Erase] is set, be careful not to erase an image accidentally.
With auto power off, the lens will not retract regardless of the setting.
Make sure that the lens has been retracted before detaching it.
When [Enable] is set, this function takes effect regardless of the lens’s
focus mode switch setting (AF or MF).
To Next Page
Loading...
