Canon EOS M User Manual

163
Peripheral light fall-off is a phenomenon that makes the image corners
look darker due to the lens characteristics. Color fringing along subject
outlines is another chromatic aberration. Both lens aberrations can be
corrected. RAW images can be corrected with Digital Photo
Professional (provided software, p.340).
1
Select [Lens aberration
correction].
Under the [A2] tab, select [Lens
aberration correction], then press
<Q/0>.
2
Select the setting.
Check that [Correction data
available] is displayed for the
attached lens.
Select [Peripheral illumin.], then
press <Q/0>.
Select [Enable], then press <Q/
0>.
If [Correction data not available] is
displayed, see “About the Lens
Correction Data” on page 165.
3
Take the picture.
The image will be recorded with the
peripheral illumination corrected.
3 Lens Peripheral Illumination / Chromatic Aberration Correction
Peripheral Illumination Correction
Depending on shooting condi ions, noise may appear on the image periphery.
The correction amount applied will be slightly lower than the maximum
correction amount that can be set with Digital Photo Professional
(provided software).
The higher the ISO speed, the lower the correction amount will be.

Canon EOS M Specifications

General

Image Processor	DIGIC 5
ISO Range	100-12800 (expandable to 25600)
Battery	LP-E12
Sensor Size	22.3 x 14.9 mm
Lens Mount	Canon EF-M
Maximum Shutter Speed	1/4000 sec
Minimum Shutter Speed	30 sec
Continuous Shooting	4.3 fps
Sensor	18.0 MP APS-C CMOS
Autofocus	Hybrid CMOS AF
Display	3.0-inch Clear View LCD
Video Recording	1080p Full HD
Connectivity	HDMI, USB
Dimensions	108.6 x 66.5 x 32.3 mm
Storage Types	SD/SDHC/SDXC
LCD Screen Resolution	1, 040, 000 dots
Viewfinder	Optional EVF-DC1 (sold separately)