33
About the Lens Image Stabilizer
1
Press the shutter button halfway.
X The Image Stabilizer will operate.
2
Take the picture.
When the picture looks steady on the
LCD monitor, press the shutter button
completely to take the picture.
Using the Image Stabilizer when Shooting
The Image Stabilizer cannot correct “subject blur”, when the subject moves at
the time of exposure.
For bu b exposures, set the IS to <2>. If <1> is set, Image Stabilizer
incorrect operation may occur.
The Image Stabilizer may not be effective for excessive shaking such as on a
rocking boat.
The Image Stabilizer works in all focus modes.
When the IS is set to <2>, will appear on the screen.
When using a tripod, you can still shoot with the IS set to <1> with no
problem. However, to save battery power, setting the IS to <2> is
recommended.
The Image Stabilizer is effective even when the camera is mounted on a
monopod.
To Next Page
Loading...
