Viewing the Images on TV
248
5
Press the <x> button.
X The image will appear on the TV
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
The images will automatically be
displayed at the TV’s optimum
resolution.
By pressing the <B> button, you
can change the display format.
To play back movies, see page 239.
When the camera is connected to a TV, the following operations
cannot be performed:
During shooting:
• Moving the AF point
• Magnifying/reducing the image
• Switching Movie Servo AF ON/OFF during movie shooting
During movie playback:
• Quick Control
The images cannot be output at the same time from both the <D>
and <q > terminals.
Do not connect any other device’s output to the camera’s <D>
terminal. Doing so may cause a malfunction.
Certain TVs may not be able to play back the captured images. In such a
case, use he AV cable AVC-DC400ST (sold separately) to connect to
the TV.
To Next Page
Loading...
