Ink T anks
2. Lift the stopper (a) of the Ink T ank Lock Lever of the color for replacement. Lift the Ink T ank Lock
Lever until it stops, and then push it down to the front.
Important
• Push the Ink T ank Lock Lever down until it locks.
• Make sure the Ink T ank Lock Lever does not return to the previous position.
3. Hold the empty Ink T ank by the handle (a) to remove it, and press the OK button.
Note
• If there is still some ink left in the Ink T ank you removed, store the ink tank in the box with the ink
holes (a) facing up. Otherwise, ink may leak and cause stains.
• Dispose of used Ink T anks according to local regulations.
708 Maintenance
To Next Page
Loading...
