Setting Item Description, Instructions
Main-
te-
nance
Clean Platen Move the Carriage in preparation for cleaning the
Platen.
Inter-
face
Setup
EOP Timer Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
TCP/
IP
IPv4 IPv4 Mode Choose whether the printer IP address is configured
automatically or a static IP address is entered manual-
ly.
Proto-
col
DHCP Specify the protocol used to configure the IP address
automatically.
BOOTP
RARP
IPv4
Set-
tings
IP Address Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
The value that was automatically configured is dis-
played if you have set IPv4 Mode to Automatic.
Subnet Mask
Default G/W
DNS
Set-
tings
DNS Dync update Specify whether DNS server registration is updated
automatically.
Pri. DNS
SrvAddr
Specify the DNS server address.
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain
Name
Specify the DNS domain name.
IPv6 IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
DNS
Set-
tings
DNS
Dync
update
State-
full
Addr
Specify whether DNS server registration is updated
automatically.
State-
less
Addr
Pri. DNS
SrvAddr
Specify the DNS server address.
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain
Name
Specify the DNS domain name.
Net-
Ware
NetWare Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Frame Type Specify the frame type to use.
Control Panel
>
Printer Menu
>
Menu Settings iPF6300S
9
920
To Next Page
Loading...
Need help?
General