Canon imagePROGRAF IPF8300S User Manual

Setting Item Description, Instructions
Inter-
face
Setup
Net-
Ware
Print Service Choose the print service.
AppleTalk Specify whether to use the AppleTalk protocol. To ap-
ply your changes, choose Register Setting.
Ether-
net
Driver
Auto Detect Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Comm.Mode Choose the LAN communication method.
Ethernet Type Choose the LAN transfer rate.
Spanning Tree Choose whether spanning-tree packets are supported
over the LAN.
MAC Address Indicates the MAC address.
Interface Print Print interface settings information.
Return Defaults Choose OK to restore Interface Setup settings to the
default values.
System
Setup
Sleep Timer Specify the period before the printer enters sleep
mode.
Buzzer Choose On for the buzzer to sound once for warnings
and three times for errors.
Contrast Adj. Adjust the Display Screen contrast level.
Date &
Time
Date Set the current date.
Time Set the current time. Available only if the Date setting
is specified.
Date Format Specify the date format.
Language Specify the language used on the Display Screen.
Time Zone Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Length Unit Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area, and so on.
Detect Mismatch Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type
and size in the printer driver.
Choose Pause to have printing paused under these cir-
cumstances. Choose Warning to continue printing af-
ter notification. Choose None to continue printing
without notification. Choose Hold Job to store jobs
with mismatched types and sizes of paper on the print-
er hard disk, in a print queue awaiting processing.
(See "Using the Printer Hard Disk.")
→P.719
Paper
Size
Basis
Roll Selection 1 If roll size detection is activated, choose whether ISO
A3 (297mm) or 300mm Roll is applied when a roll of
an intermediate width is detected.
Control Panel > Printer Menu >
iPF6300S Menu Settings
9
921

Canon imagePROGRAF IPF8300S Specifications

General

Brand	Canon
Model	imagePROGRAF IPF8300S
Category	Printer
Language	English