Canon LBP6230dw - Page 294

0K57-00Y
Basic Windows Operations
Displaying the Printer Folder
Enabling [Network discovery]
Displaying the [CD-ROM/DVD-ROM Setup] Screen
Checking the Bit Architecture
Displaying [Programs and Features] or [Add or Remove Programs]
Displaying [Device Manager]
Displaying the Printer Folder
Windows XP Professional/Server 2003
[Start]
select [Printers and Faxes].
Windows XP Home Edition
[Start]
select [Control Panel] [Printers and Other Hardware] [Printers and Faxes].
Windows Vista
[Start]
select [Control Panel] [Printer].
Windows 7/Server 2008 R2
[Start]
select [Devices and Printers].
Windows 8/Server 2012
Right-click the lower-left corner of the screen
select [Control Panel] [View devices and printers].
Windows Server 2008
[Start]
select [Control Panel] double-click [Printers].
Enabling [Network discovery]
If you are using Windows Vista/7/8/Server 2008/Server 2012, enable [Network discovery] to view the computers on your network.
Windows Vista
[Start]
select [Control Panel] [View network status and tasks] under [Network discovery], select [Turn on network discovery].
Windows 7/Server 2008 R2
[Start]
select [Control Panel] [View network status and tasks] [Change advanced sharing settings] under [Network discovery],
select [Turn on network discovery].
Windows 8/Server 2012
Right-click the lower-left corner of the screen
select [Control Panel] [View network status and tasks] [Change advanced sharing
settings]
under [Network discovery], select [Turn on network discovery].
Windows Server 2008
[Start]
select [Control Panel] double-click [Network and Sharing Center] under [Network discovery], select [Turn on network
discovery].
Displaying the [CD-ROM/DVD-ROM Setup] Screen
If your computer does not display the [CD-ROM/DVD-ROM Setup] screen after you insert the CD-ROM/DVD-ROM, follow the procedure
below. This following example uses "D:" as the name of the CD-ROM/DVD-ROM drive. The CD-ROM/DVD-ROM drive name may be
different on your computer.
Windows XP/Server 2003
[Start]
select [Run] enter "D:\MInst.exe" click [OK].
Windows Vista/7/Server 2008
[Start]
enter "D:\MInst.exe" in [Search programs and files] or [Start Search] press the [ENTER] key on the keyboard.
Windows 8/Server 2012
Right-click the lower-left corner of the screen
select [Run] enter "D:\MInst.exe" click [OK].
Checking the Bit Architecture
㻡㻠㻌㻛㻌㻡㻢
Downloaded from ManualsPrinter.com Manuals