Canon MAXIFY MB2350 - Loading Documents in the ADF (Auto Document Feeder)

Loading Documents in the ADF (Auto Document Feeder)
Note
• To scan a document at optimum quality, load it on the platen glass.
1. Make sure that any original has been removed from the platen glass.
2.
Open the document tray.
3.
Insert the document in the document tray until you hear a beep sound.
Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.
Originals You Can Load
Note
• When you set the alarm to be silent in Sound control of Device user settings, the alarm will not
beep even if the document is inserted in the document tray.
Device user settings
4.
Adjust the document guides (A) to match the width of the document.
Do not slide the document guides too hard against the document. The document may not be fed
properly.
185