Cannot Detect the Machine during Wireless LAN Setup: Check 3
Is the machine connected to the access point?
By using the icon on the touch screen, make sure that the machine is connected to the access point.
If the icon is displayed:
The machine may be placed far away from the access point. Place the machine near the access point
temporarily, then click Redetect on the Check Printer Settings screen.
When the machine is detected, follow the instructions on the screen to continue to set up the network
communication.
If the machine cannot be detected, the machine is not connected to the access point. Connect the
machine to the access point.
Click Back to Top on the Check Printer Settings screen to try to set up the network communication from
the beginning.
If the icon is displayed:
Go to check 4.
Cannot Detect the Machine during Wireless LAN Setup: Check 4
919
To Next Page
Loading...
