Canon MAXIFY MB2350 - When Detecting the Printers Have the same Name During Setup

When Detecting the Printers Have the Same Name during Setup
When the printer is detected during setup, you may see multiple printers of the same name on the detection
result screen.
Select a printer with checking the MAC address or the serial number set to the printer against that on the
detection result screen.
Note
• A serial number may not be displayed on the detection result screen.
To check the MAC address of the printer, print out the network setting information using the operation panel
of the printer.
Printing Out Network Setting Information
Additionally, you can check the network setting information on the touch screen of the printer. Select WLAN
setting list from Confirm LAN settings in LAN settings under Device settings, and check the item
displayed on the touch screen.
LAN settings
287