8.
Enter the passphrase, then click Next>.
Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63 alphanumeric
characters or a 64-digit hexadecimal value.
If you do not know the access point passphrase, refer to the instruction manual provided with the access
point or contact its manufacturer.
The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure
encryption) automatically.
Important
• If Auto is not displayed on Dynamic Encryption Type:, select either TKIP(Basic Encryption) or
AES(Secure Encryption).
9. Click Finish.
300
To Next Page