1
Select the [Use Filter] check box.
Select the check box to restrict communication. Clear the check box to disable the restriction.
2
Specify the address.
Enter the MAC address in the [Address to Register] text box and click [Add]. Allows communication (received) only with
devices having registered MAC addresses, and restricts communication with devices with any other MAC addresses.
You do not need to delimit the address with hyphens or colons.
Check for entry errors
If MAC addresses are incorrectly entered, you may become unable to access the machine from the Remote UI, in which
case you need to set <MAC Address Filter> to <Off>.
MAC Address Filter
Deleting a MAC address from exceptions
Select a MAC address and click [Delete].
3
Click [OK].
You can enable or disable the IP Address Filter settings from <Menu>. MAC Address Filter
LINKS
Specifying IP Addresses for Firewall Rules
㻞㻜㻞㻌㻛㻌㻟㻟㻢
To Next Page