8200-M698-O1 Rev B 225 Installation and Technical
61
CALIBRATION AND SETUP, CONT.
DIO Setup Completed
When the status of all Preset Weight Comparators has been set, press EXIT (Navigation Keys
UP Arrow) to exit and return to the SETUP MENU #2.
SETUP MENU #2
1. SERIAL
2. DIO
3. PRINT TABS
4. SETUP SCALE 1
5. CALIBRATE 1
Enter Selection: 0 ` NEXT ^ PREV
With the SETUP MENU #2 displayed,
Proceed to the next setup parameter.
Press PREV (Navigation Keys UP Arrow) to return to SETUP MENU #1.
Press NEXT (Navigation Keys Down Arrow) to proceed to the SETUP MENU #3.
To Next Page
Loading...
