27
ENG
+040000021 - rel. 2.0 - 20.02.2009
8. CONFIGURATION
How to di erentiate a device (or a group of devices) from the
standard
An example of how to create another model of device with other features starting from the IR33
From the home page, enter the CONFIGURATION
MODEL MANAGEMENT COPY MODELS
menu, from the ORIGINAL MODEL list
choose the standard model to start from (in
the example, “IR33”) and in the fi eld TARGET
MODEL fi eld enter the name to be given to the
new model (in the example, the new model
has been called “IR33modifi cato”)
The model created is now identical to the
one used as the starting point.
Return to the MODEL MANAGEMENT
MODEL CONFIGURATION menu to
customise the new devices created, changing
the settings relating to:
ALARMS;•
LOG/GRAPH/REPORTS;•
DESCRIPTION/UNIT OF MEASURE.•
A model can thus be created that is diff erent
from the one used as the starting point, based
on specifi c needs.
After having created the new model with
diff erent features from the standard IR33,
these types of devices can be installed,
following the fi rst steps in the sequence of
operations presented in the TUTORIAL on
the confi guration of a simple line.
To Next Page
Loading...
