52
ENG
+040000021 - rel. 2.0 - 20.02.2009
16. TECHNICAL SPECIFICATIONS
Power supply 110 to 240 V ~ 50/60 Hz
Power input 6.7 W (typ), 9 W (max)
Operating conditions 5T50 °C, 20 to 80 % rH
Storage conditions -20T60 °C, 20 to 80 % rH
Index of protection IP65
Display resolution 240 x 320 pixels
Type of LCD 5.7” TFT, (12 o’clock), 262144 colours
Other board functions RTC, Watchdog (1000 ms), JTAG
Digital outputs 2 N.O. relays, 5 A 30 Vdc / 250 Vac,
1 N.O. relays, 6 A 250 Vac,
Serial ports 2 RS232 serial ports on RJ45 connector
2 RS485 serial ports, master, hd, opto-isolated, 19200 bps
1 RS485 serial port, master, hd, opto-isolated, 19200 bps
Digital inputs 2 opto-isolated inputs at max. 300 baud
Backlighting White LEDs
Buzzer Max 80 dB at 10 cm
USB ports 2 standard HOST ports, type A connector, on front
1 standard HOST port, type A connector, internal
Internal modem Socket Modem, PSTN V.34/33.6K data rate
Internal battery (*) Lithium model CR2032, 3V
Internal fuse (**) F1 1.25 A
Electromagnetic compatibility CEI EN 60950
CEI EN 55022
CEI EN 55024
Environmental pollution Conforms to RoHS directive
Cover material Transparent polycarbonate
Chassis material Plastic
Warning:
(*) If necessary, replace exclusively with an identical or compatible type. •
Danger of explosion if an incorrect type of battery is used. Dispose of used batteries according to the instructions
(**) Only replace with an identical or compatible type. • Even when the fuse blows some parts of the system are still
live and may represent a danger during maintenance.
This is a class A product. In domestic environments it may cause radio frequency disturbance. In this event the user •
may need to adopt adequate measures;
This equipment shall not be set up to make automatic calls to the Telecom Emergency Service;
•
The call log incorporated in this equipment does not record all answered calls. The call log, therefore may not agree •
with the Telecom account which may include calls not shown on the log;
Do not set more than ten call attempts to the same number within any 30 minute period;
•
This equipment must not to be used in any circumstances which may constitute a nuisance to other Telecom •
Customers.