5.2.6 STATUS
This command provides you with information about currently-established
sessions.
STATUS
Session status is output as in the following example:
Sess Service TimeCnctd TxChrs RxChrs State
1 DEVSYSA 3:25:10 2148 27352 Connected
2 MAIL 2:40:22 437 641 Connected
3 DEVSYSB 2:50:35 1292 600249 Connected
4 100.2.3 10:20 189 400 Connected
where:
Sess = Session number.
Service = Description of service at its highest level
(i.e. displays name in preference to Internet Address).
TimeCnctd = HH:MM:SS.
Tx/RxChrs = 0 to 2,000,000,000 data characters.
State = TCP/TELNET connection state (Internal).
X870-300351 Issue 1 5-9 Rev.0
To Next Page
Loading...
