4.6.1 General Status Menu (stat gen command)
This screen displays up to a page of connections.
Router : Watford GENERAL CONNECTION STATUS Rel x.y
--------------------------------------------------------------------------------
Connid Source Connid Destination State
1 1100001321 113 001.001.001.003 Ac
114 192.000.002.200 Ac
115 111.111.111.111 Cl
2 120 001.001.001.001 Ac
100 111.111.111.111 64 110001123456 Ac
3 110000112345 106 192.000.002.001 Ac
* = Currently selected CLEAR Connid = clear connection
--------------------------------------------------------------------------------
PF2 - Help ^B Prev - Page PF4 - Main Menu
^F - Next Page PF3 - Prev Menu
--------------------------------------------------------------------------------
(stat gen) Enter command :
Connid (Source)
This field identifies the user by the X.25 channel number (1-64) or TCP
connection identity (65 upwards). Either of these values can be used to
gain further status from the Connection Status screen.
Source
This field displays information gained about the originator of the call
(source) when the user contacted Router.
Connid (destination)
This field identifies the outgoing session within Router, i.e. by the TCP
connection identity. Both of these values can be used to gain further status
from the Connection Status screen.
Destination
This field displays the service description of the outgoing session. This can
be the name of the service, an Internet address, or an X.121 address.
X870-300351 Issue 1 4-44 Rev.0
To Next Page
Loading...
