4.6.3 Line Status/Statistics Menu (stat line command)
Router : Watford LINE STATUS/STATISTICS Rel x.y
--------------------------------------------------------------------------------
MAC: Tx frames : Rx frames :
CRC errors : Long frames :
Overruns :
IP: Datagrams : Checksum err :
Short Pkts : Version err :
ICMP: Received Sent
Echo Request : Echo Request :
Dest unreach : Dest unreach :
Srce Quench : Srce Quench :
Time exceed : Time exceed :
ARP - ARP Table RE - Reset stats
--------------------------------------------------------------------------------
PF2 - Help PF4 - Main Menu
PF3 - Prev Menu
--------------------------------------------------------------------------------
(stat line/rtr mac) Enter action :
This screen displays information about MAC, IP and ICMP, i.e. the
Ethernet line side. It is possible to enter the ARP status screen from here.
MAC: Tx frames, Rx frames
The number of frames transmitted and received on Ethernet.
MAC: CRC errors
The number of frames received from Ethernet with CRC errors.
MAC: Long frames
The number of frames received that exceed the maximum frame length.
MAC: Overruns
The number of times Router has been overrun by incoming Ethernet
frames.
IP: Datagrams
The number of datagrams that IP has sent/received.
IP: Checksum err
The number of IP datagrams that were received with checksum errors.
X870-300351 Issue 1 4-49 Rev.0
To Next Page
Loading...
