3.2 Installing the Application
Using the Series 8000 Node Manager, select the Utilities menu and then
the Install Application menu.
When you first enter the screen it lists all the applications. An asterisk (*)
in the In Use column indicates that an application has been selected for
loading onto one or more slots.
The Install command allows you to install a new application onto the PSE
from the Router distribution disk. When you select this command, you will
be prompted to insert the distribution disk into drive B and press
RETURN.
You then install the application by selecting
PF1. The application is
installed, and the list of installed applications is updated on the screen.
The Node Manager copies all the files needed to support the application,
from the Router distribution disk to the system disk. The files copied will
be the application's load and database files.
An application may also be installed remotely (if the Series 8000 Node
Manager software is version 8 or above). To do this the distribution disk
should first be inserted into drive B at the local node and using the Series
8000 Node Manager all files from the disk should be copied from the local
drive B to disk drive B at the remote node. It will then be necessary to
logon as Node Manager at the remote node and install the application as
detailed above. (Full instructions on how to perform a remote file copy are
given in the 8500/8400/8325 User Guides.)
X870-300351 Issue 1 3-2 Rev.0
To Next Page
Loading...
