Case 8000 Series - Configure General Information Form

4.4.1 Configure General Information Form (conf gen command)
Router : Watford CONFIGURE GENERAL INFORMATION FORM Rel x.y
--------------------------------------------------------------------------------
Router Identity :
Router Slot Number :
Default User prof :
Default Service prof :
Manager Password : Verify Password :
Manager Terminal Type :
--------------------------------------------------------------------------------
PF2 - Help ^R - Restore
PF1 - Submit ^C - Abort
--------------------------------------------------------------------------------
This form allows you to configure items that do not directly associate with
other parts of the configuration, or warrant a form of their own.
Router Identity (Free Format Text)
This is a mandatory field. A name to represent the Router card must be
entered. This identity will appear at the top of each manager screen.
Slot Number (Information Only)
This is the slot number of the Router card.
Default User Profile (Free Format Text, 15)
This is a mandatory field. It contains a user profile number or name.
This profile is used whenever a user establishes a connection to Router and
no direct method of obtaining a profile has been established (e.g. no profile
specified in service table).
Default Service Profile (Free Format Text, 15)
This a mandatory field. It must contain a service profile number or name.
This profile is used whenever a user establishes a new session to a service,
and no direct method of obtaining a profile is available (e.g. user specifying
X870-300351 Issue 1 4-10 Rev.0